0141 762 0657   Email Us
SAVED: PAGE: ACTIVE AREA:

The complete guide to different types of level transmitters

Date Published:

To put it simply, a level transmitter is an instrument that provides constant level measurement. Level transmitters are used to determine the level of a certain bulk-solid or liquid at any given time. Level Transmitters are different to level switches, which only sound an alarm when the level of material reaches a predetermined level. This blog explains how level transmitters work and showcases the Bürkert lines we stock. 

Types of level transmitters and how they operate…


There are six main types of level transmitters. Each of these transmitters work in different ways, making them useful for a number of different types of processes. BM Engineering provide a range of different types of level transmitters from Bürkert including radar, ultrasonic and guided microwave.

Radar fill level transmitters, use radio wave emissions just like radars. Usually, these devices are mounted at or near the top of a tank filled with a liquid. The transmitter itself sends out a radar signal into the liquid in the tank and receives a reflection of that signal. The transmitters will then accurately calculate the current fill level of the tank based on how long it takes the transmitted signal to return.

Ultrasonic level transmitter, which acts in a manner similar to the non-contact radar fill level transmitters. With this transmitter, an ultrasonic transducer mounted to or near the top of the container sends out an ultrasonic pulse. When the pulse hits the surface of the liquid, it is reflected, and the sensor calculates fill level based on the time between the pulse and the return signal.

Guided Microwave Level Transmitters, this type of level transmitter works by sending a microwave or electromagnetic pulse through a sensor rod/cable. When the signal hits the surface of the liquid, it travels back up the sensor rod and back to the transmitter housing. The electronics are integrated into the transmitter housing, which determine the filling level from the time taken for the signal to travel down the sensor rod and back up again. The value is then shown in the display of the transmitter. This type of level transmitter is suitable for liquids, and is used in industrial applications in all areas of process technology.

Magnetic Level Transmitters, use a small, magnetic object suspended in a buoyant float. This is normally inside a narrow auxiliary column, in order to restrict any lateral movement of the the float. While the float sits on top of the liquid, a different magnetic device measures the movement of the float. This allows an accurate, consistent fill level to be transmitted. This method is useful for continuous measurement, due to the float’s tendency to rise or sink in harmony with the level of liquid.

Capacitance Level Transmitters, take their name from capacitors. In other words, the electrical circuit element that temporarily stores energy for a circuit to use. Capacitors store energy between two insulated electrodes. A non-conductive medium is placed between the two electrodes to help store electrical charge. The more dielectric the medium, the more energy can be stored. So capacitance level transmitters therefore use the liquid in a tank as a dielectric medium between two or more electrodes.

Hydrostatic Level Transmitters, also known as pressure level transmitters, essentially determine a container’s fluid contents by measuring the pressure of the resting body of fluid within it. The bigger the force of the liquid, the bigger the volume of fluid inside the container. This is one of the most common types of fill level detection devices. It is crucial that the liquid’s density remains constant to ensure accurate measurement. As the liquid’s gravity increases, the pressure per cubic inch exerted on the transmitter also rises.

Burkert Level Transmitters 


BM Engineering is a premium Bürkert partner. Bürkert is one of the world’s leading manufacturers of level transmitters; here we take a look at two of their most popular level transmitters:

Type 8188 - Guided microwave level measurement device

The Type 8188 is a level measurement device with cable, rod, both interchangeable probe or with coax probe, designed for continuous level measurement. The unit is suitable for liquids, for industrial use in all areas of process technology.

Burkert Type 8188 Level Transmitters

Features and benefits:

Universal level measurement device for liquids
Liquid interface measurement
Insensitive to dust and steam
4... 20 mA/HART - 2 wires, ATEX/IECEx approvals

TYPE 8177 – Ultrasonic Level Transmitter

The Bürkert Type 8177 is a non-contact ultrasonic level transmitter, designed for continuous level measurement in open or closed vessels. Suitable for liquids and solids in virtually all industries and applications, but it is particularly suitable in water and wastewater management systems.
 
Burkert TYPE 8177 – ULTRASONIC LEVEL TRANSMITTER


Features and benefits:

Compact design for level measurement up to 8 m
4...20 mA/Hart - 2 wires Output
Suitable for solids or liquids
ATEX approvals for use in Hazardous Areas.


Speak to a BM Engineering Supplies adviser today about our complete range of Level Transmitters by calling 0141 762 0657 or email sales@bmengineering.co.uk

Share this:



< Article List

Total Pages:
Total Results:
Page Start:
Page Result #:

Address

9-11 Hilton Terrace
Bishopbriggs
Glasgow
G64 3HB

Tel: +44 (0)141 762 0657

Email Us


Accreditations

  

Catalogue Download

Download a copy of our product catalogue in PDF format.

Download

Site Map

Quick Contact

Please don't hesitate to contact us if you any questions on any of our products services.

Name:

Email:

Comments: